Solenoid power on delay board Module.

The DELAYER-S1 board is designed to delay 12VDC Solenoid operation for applications such as clutch and actuators power on on delays. If used properly, it will eliminate the need for expensive industrial power switch delay board, which would otherwise be needed to carry out the same task.

DELAYER-S1 is easy to install, setup and operate. If you want to  professionally power your HVAC actuators, DELAYER-S1 offers the features you need. Mounted easily via two 0.125" mounting holes. and easily connected via Terminal Blocks.

The board is designed to operate from 9 to 12VDC signal or 12V Battery.

1. Input power to the solenoid.

2. Output power with delay to the solenoid.

DELAYER-S1 Features

• Up to custom 6 Second delay.

• Generally powered from any 9 to 12V DC power source or signal.

• Also, designed to operate from 12VDC car battery

Specifications

• Input voltage                           9-12V DC

• Relative Output voltage stability  +/-3%

• Solenoid                                  Up to 0.5A at 110VAC/60HZ.

• PCB material                             FR4

• Max power consumption             1W

• Storage temperature                 40 - 70   [F]

• Operating temperature               32 - 140 [F] (0 to 60°C) @ 95% RH

• Low board DC voltage                12[V] max

• Manufactured                           100% in USA

Pricing 

* Prices, P#, SKU# and colors are subject to change without notice. 

DELAYER-S1 Relay Power on delay interface board

EID-DELAYER-S1-XX12V

$27.95

  ^•