INTERFACER – NIA2 - Non-Inverting Operation Amplifier interface board.

 

The INTERFACER-NIA2 board is designed to keep polarity and amplified input voltages to output voltage. If used properly, it will eliminate the need for expensive boards, which would otherwise be needed to carry out the same tasks.

 

The INTERFACER-NIA2 is easy to install, setup and operate. If you want to do professional voltage measurement related functions, the INTERFACER-NIA2 offers the features you need. Mounted easily via two 0.125" mounting holes.

 

Simply connect the board to +5 to 15 VDC or +/-5to 15 VDC Connect your input voltage signal and our board will convert it to inverting voltage with pre-configured output/input gain. 

 

The board can be easily modified for different input voltages and output voltage ranges. 

 

 

INTERFACER – NIA2 Features

 

  • Can be customized to accommodate your gain requirement.

  • Input to  output gain is adjusted via trimmer.

  • Also, designed to operate from 12VDC car battery.

Specifications

  • Input Impedance                      >10K Ohms

  • Output voltage (standard)          0.4VDC < VCC-VSS

  • PCB material                             FR4 (UL approved)

  • Max power consumption              0.5W

  • Storage temperature                  40 - 70   [F]

  • Operating temperature                32 - 140 [F] (0 to 60°C) @ 95% RH

  • Power source                            5 to 15VDC +/-3%, or +/- 5 to 15VDC +/-3%

  • Gain Adjustment                         Via multi turn trimmer (standard)

  • Mounting                                 Two 0.125” holes

  • Manufactured                            100% in USA

Pricing 

 

* Prices, SKU#, P# and colors are subject to change without notice. 

   Additional 10% discount with student ID, USA only.

Description

SKU #

Price

INTERFACE-NIA2 Dual non-inverting op-amp board.

EID-INTERF-CER-NIA2

$33.00

INTERFACE-NIA2 Dual non-inverting op-amp board with 6" wires.

EID-INTERF-CER-NIA2-W

$45.00

INTERFACE-NIA2 Dual non-inverting  Op-amp board with terminal blocks

EID-INTERF-CER-NIA2-TB

$36.00

Two Teflon 3/4" long mounting spacers and Four 4-40 1/4" screws. 

EID-INTERF-CER-XX34-4-40

$7.99

Two Teflon 1/2" long mounting spacers and Four 4-40 1/4" screws. 

EID-INTERF-CER-XX12-4-40

$6.99

Custom gain configuration option addition.

EID-INTERF-CER-DFO1-G

$9.99

  •