SENSER-HUMX. High accuracy resistance type humidity sensors board.

 

The SENSER-HUMX boards are designed to perform high accuracy humidity to resistance conversion. If used properly, it will eliminate the need for expensive humidity sensors and  meters, which would otherwise be needed to carry out the same tasks.

 

SENSER-HUMX are easy to install, setup and operate. If you want to do professional humidity measurement related functions, SENSER-HUMX offers the features you need. Mounted easily via two solder pad mounting holes.

 

The board design to powered via low frequency low voltage, low current source. Ideally current alternating of 1V at 1KHZ.

 

The SENSER-HUMX are a two terminal integrated board (IB) humidity sensors. The SENSER-HUMX series are made of complex deposit epoxy base and high temperature and pressure formulated tin over cupper technology. This made them superior due to unified surface. 

 

Very short response time, low hysteresis, high repeatable ,interchangeable, as well as low price make it a winner; among HAVC controller, data loggers,  and  automotive manufactures and consumer products and appliance. It used as a building board for many air humidity control environments.

 

The board will convert air humidity with tight tolerances of 3%-97%, depending on model in to equivalent resistance value.

 

    

SENSER-HUM15

 

 

   

SENSER-HUM33

 

 

   

SENSER-HUMW7, Can be use also as a water sensitive sensor. For water leaks detection (see applications note 18)

SENSER-HUMX Features

 

  • Fine small flat surface mounted anywhere.

  • Accuracy of 2.7%

  • fast response time

  • High repeatable.

  • Interchangeable. No need for new calibration.

  • very low hysteresis

  • Feature EID's tin on cupper high pressure high temperature technology.

Specifications

  • PCB material                            FR4 composite

  • Output resistance                    0.013 Ohms to 97M Ohms

  • Max power consumption            0.01W

  • Storage temperature                40 - 70   [F]

  • Operating temperature              32 - 140 [F] (0 to 60°C) @ 97% RH

  • AC voltage drive                      Current alternating at 1 to 9 [V] AC. Ideally 1VAC

  • Frequency drive                       Current alternating at 50HZ to 10KHz Ideally 1KHZ

  • Humidity range                        3-97% varies with models

  • Accuracy                               2.7%

  • Manufactured                         100% in USA

Pricing 

 

* Prices, P#, SKU# and colors are subject to change without notice. 

   Additional 10% discount with student ID, USA only.

Description

SKU #

Price

SENSER-HUM15 High accuracy small humidity board. 

EID-SENSER-HUM15

$3.54

SENSER-HUM33 High accuracy mid size humidity board. 

EID-SENSER-HUM33

$4.68

SENSER-HUMW7 High accuracy large humidity board. 

EID-SENSER-HUMW7

$6.39

SENSER-HUMW9X High accuracy high sensitive large water/humidity detection board. 

EID-SENSER-HUMW9X

$6.23

  •